G4 leak-sealing solution is a milky-colored nanopolymer solution that is used to eliminate small leaks in closed systems. With this product, there is no need to locate and demolish the site of the leak and then reconstruct it. Simply injecting this solution into the closed system and waiting up to a maximum of 24 hours can eliminate all leaks in the system.
The operation of this product is as follows: When the solution is injected into the water and dissolved (it is a solvent solution in water), it becomes active and simultaneously, as the water rotates throughout the system, it hardens upon contact with air friction wherever the water is leaking from the system or pipe. As a result, it fixes the leaks.
It should be noted that this solution is designed in a way that it does not cause any damage to the mechanical parts of the system or block the water circulation path. For this reason, this product is designed to seal small leaks in the system.
In addition, this solution also improves the performance of mechanical parts, including circulation pumps.
For better and faster performance of this solution, it is better to place the temperature of the rotating water system at the highest possible temperature, as high temperature is one of the positive factors affecting the performance of this product.
Each capsule contains 300 milliliters of solution and is sufficient for a system with 125 liters of water, or 15 radiator blocks, or 100 square meters of floor heating. If the system is larger, a larger amount of solution is required in proportion to the number of capsules.
125L of water in the system.
Or 15 Blocks of Radiator
Or 100 sq Meter of Under floor heating
| Technical Information | |
|---|---|
| Where to use: | In the closed circuit of Heating/ Cooling systems, even cooling system of vehicles, to prevent corrosion and lime scale formation and pH balancer |
| Place of ingection to system: | Radiator air plug or any place with female " G1/2 connection |
| Weight: | 0.346g |
| Connection size: | "G1/2 |
| Soluble Color: | Milky |
| Manufacturer: | PYACO |
| Manufacturing Country: | IRAN |
| Time for injection: | Maximum 20 seconds |
| Density gr/cm2: | 1.2 |
| pH | 7 |
